Cross Contamination Prevention in Healthcare Facility

Germs and viruses can’t be avoided, but healthcare facilities must be especially vigilant in controlling them – and if the proper steps aren't taken to avoid it, cross-contamination in hospitals and other healthcare settings can put staff and patients at increased risk.

The spread of bacteria and other pathogens is particularly concerning for people with compromised immune systems, so it’s critical to have cleaning protocols that properly mitigate the threat of cross-contamination. The experts at ServiceMaster Clean designed our patient-centered cleaning program with cross-contamination prevention in mind. Use these three tips from our environmental cleaning specialists to help prevent cross-contamination in your healthcare facility:

1. Use the Right Cleaning and Sanitation Supplies

In order to prevent harmful bacteria from spreading, your staff need to know the difference between cleaning, sanitizing, and disinfecting. They also so need to have the right cleaning supplies to do the job properly:

• Microfiber cloths. Microfiber does a far better job of picking up dirt, debris, and germs than traditional cleaning materials. A combination of clean water, a commercial detergent, and a microfiber cloth is ideal for basic surface cleaning.

• Hospital-grade disinfectant. Once a surface or an item has been cleaned, it can then be disinfected. Healthcare facilities must use hospital-grade disinfectants to prevent cross-contamination.

• Alcohol-gel hand sanitizer. Keeping alcohol-based hand sanitizer widely available throughout your healthcare facility can help stop the spread of germs from hand-to-surface, hand-to-hand, and hand-to-mouth contact.

Beyond using the right supplies, keeping soiled and clean materials separate and following proper laundry procedures are also critical for reducing the risk of cross-contamination in healthcare environments.

2. Schedule Routine Environmental Cleaning

Regular cleaning, sanitizing and disinfecting help control viruses and bacteria before they have a chance to spread from one surface or room to another. Items and surfaces that are touched frequently are more prone to contamination and, therefore, require more frequent and thorough cleaning. All staff should be trained on basic cleaning protocols for healthcare settings, especially high-touch areas, to minimize the risk of cross-contamination.

High-touch surfaces in healthcare settings include:

• Door handles
• Bed rails
• Bedside tables
• Bathroom faucets
• Toilet seats and flush handles
• Telephones
• Elevator buttons
• Hand sanitizer dispensers

3. Encourage Proper Hand Hygiene Among Your Staff

Proper hand hygiene is the simplest, but perhaps the most important, component of preventing cross-contamination in healthcare facilities. Proper hand hygiene consists of just a few easy steps:

• Wet hands with water.
• Apply soap, lather, and scrub vigorously for at least 20 seconds.
• Pay attention to all surfaces of the hands, including fingernails.
• Rinse thoroughly and dry hands using a clean cloth, air dryer, or disposable towel.

Put a stop to the spread of germs and viruses by ensuring that your staff are washing their hands in the correct manner and at the correct times. According to the Centers for Disease Control and Prevention (CDC), hand hygiene in healthcare facilities should be performed in the following situations:

• Before eating.
• Before and after contact with a patient's skin.
• Before moving to a clean body site after contact with a contaminated body site.
• After using the washroom.
• After removing gloves.
• After contact with any inanimate object near a patient.
• After contact with bodily fluids or broken skin.
• After dressing a wound.

While your staff play a crucial role in the day-to-day prevention of cross-contamination, it’s also recommended that healthcare facilities partner with an experienced environmental cleaning provider with documented janitorial procedures designed to reduce the risk of cross-contamination. Call the experts at ServiceMaster Clean to learn more about our customized healthcare cleaning programs and the procedures we use to help prevent cross-contamination.

Abdullah, F., et al., THE FUNCTION OF THE FAMILY IN THE CARE OF MENTAL PATIENTS: A CASE STUDY IN KG HEALTH CLINIC. SIMEE IPOH, PERAK. JURNAL PSIKOLOGI DAN PEMBANGUNAN MANUSIA, 2013. 1(1): p. 57-72.

Bazaid, A.S., et al., Knowledge and practice of personal protective measures during the COVID-19 pandemic: A cross-sectional study in Saudi Arabia. PloS one, 2020. 15(12): p. e0243695 DOI: https://doi.org/10.1371/journal.pone.0243695.

Bhatta, D.R., et al., Bacterial contamination of frequently touched objects in a tertiary care hospital of Pokhara, Nepal: how safe are our hands? Antimicrobial Resistance & Infection Control, 2018. 7(1): p. 1-6 DOI: https://doi.org/10.1186/s13756-018-0385-2.

Dancer, S.J., Hospital cleaning in the 21st century. European journal of clinical microbiology & infectious diseases, 2011. 30(12): p. 1473-1481 DOI: https://doi.org/10.1007/s10096-011-1250-x.

Debta, P., et al., Microbial Infectious Disease: A Mini Review. Indian Journal of Forensic Medicine & Toxicology, 2020. 14(4): p. 8389.

Chinn, R.Y.W. and L. Sehulster, Guidelines for environmental infection control in health-care facilities; recommendations of CDC and Healthcare Infection Control Practices Advisory Committee (HICPAC). 2003.

Colin, M., et al., Copper alloy touch surfaces in healthcare facilities: An effective solution to prevent bacterial spreading. Materials, 2018. 11(12): p. 2479 DOI: https://doi.org/10.3390/ma11122479.

Allegranzi, B., et al., Report on the burden of endemic health care-associated infection worldwide.Geneva, Switzerland: World Health Organization, 2011.

Garcia, J.F., et al., The online sale of antibiotics for veterinary use. Animals, 2020. 10(3): p. 503 DOI: https://doi.org/10.3390/ani10030503.

Goldmann, D.A., Transmission of viral respiratory infections in the home. The Pediatric infectious disease journal, 2000. 19(10): p. S97-S102 DOI: https://doi.org/10.3390/ani10030503.

Langford, B.J., et al., Bacterial co-infection and secondary infection in patients with COVID-19: a living rapid review and meta-analysis. Clinical Microbiology and Infection, 2020 DOI: https://doi.org/10.1016/j.cmi.2020.07.016.

Chen, K.-L., et al., Novel design for door handle—a potential technology to reduce hand contamination in the COVID-19 pandemic. The American journal of medicine, 2020. 133(11): p. 1245 DOI: https://doi.org/10.1016/j.amjmed.2020.05.015.

Umar, D., et al., Evaluation of bacterial contamination in a clinical environment. Journal of international oral health: JIOH, 2015. 7(1): p. 53.

Wojgani, H., et al., hospital door handle design and their contamination with bacteria: a real life observational study. Are we pulling against closed doors? 2012 DOI: https://doi.org/10.1371/journal.pone.0040171.

World Health, O., Surface sampling of coronavirus disease ( COVID-19): a practical “how to” protocol for health care and public health professionals, 18 February 2020. 2020, World Health Organization.

Mathur, P., Hand hygiene: back to the basics of infection control. The Indian journal of medical research, 2011. 134(5): p. 611.

Sim, W., et al., Antimicrobial silver in medicinal and consumer applications: a patent review of the past decade (2007–2017). Antibiotics, 2018. 7(4): p. 93 DOI: https://doi.org/10.3390/antibiotics7040093.

Takahashi, Y. and T. Tatsuma, Metal oxides and hydroxides as rechargeable materials for photocatalysts with oxidative energy storage abilities. Electrochemistry, 2014. 82(9): p. 749-751 DOI: https://doi.org/10.5796/electrochemistry.82.749.

Odigie, A.B., et al., The role of door handles in the spread of microorganisms of public health consequences in University of Benin Teaching hospital (UBTH), Benin city, Edo state. Pharmaceutical Science and Technology, 2017. 2(2): p. 15-21.

Pea, S.T.S.A.M., RADiOGRAPhiC MARkER ADhESiVES AND thEiR POtENtiAL tO tRANSMit DiSEASES.

Salgado, C.D., et al., Copper surfaces reduce the rate of healthcare-acquired infections in the intensive care unit. Infection Control & Hospital Epidemiology, 2013. 34(5): p. 479-486 DOI: https://doi.org/10.1086/670207.

Ellingson, K.D., et al., Impact of a Novel Antimicrobial Surface Coating on Health Care–Associated Infections and Environmental Bioburden at 2 Urban Hospitals. Clinical Infectious Diseases, 2020. 71(8): p. 1807-1813 DOI: https://doi.org/10.1093/cid/ciz1077.

Haas, J.P., et al., Implementation and impact of ultraviolet environmental disinfection in an acute care setting. American journal of infection control, 2014. 42(6): p. 586-590 DOI: https://doi.org/10.1016/j.ajic.2013.12.013.

Yatmo, Y.A., W.A. Ramadhani, and A.R. Wahid. Watch your hands: door types and the risk of infections in clinic waiting area. IOP Publishing DOI: https://doi.org/10.1088/1755- 1315/195/1/012078.

Aluminum cleanroom door are available in various styles and sizes. These are ideal for offices that experience a lot of commotion. These types of doors are also very durable and can last for many years. They are made of high-quality aluminum, which makes them a popular choice for cleanrooms.  Hospital doors are rigorously designed, constructed and operated to prevent the introduction, generation and retention of indoor dust and other contaminants. The first step to ensuring a safe and clean environment is a high performance cleanroom door.

High performance doors are designed to ensure the highest purity and quality in hospital clean room to meet regulatory compliance and product quality requirements. They help maintain a hygienic environment with a range of features seamlessly integrated into their design: 

Easy to clean

High performance doors are available in a variety of materials and are easy to clean. Stainless steel and fiberglass composites are easy to clean and reduce contamination from bacteria, viruses and other bacteria. In addition, composite materials are resistant to both corrosion and chemical attack. Several models are designed for a full wipe or rinse function. For example, stainless steel doors allow thorough rinsing, virtually eliminating potential sites for bacterial growth.

High performance cleanroom doors offer a variety of contactless activation options not typically found on traditional doors. The hands-free operation of these doors minimizes hand touch areas to help control the spread of bacteria and viruses, reduce the risk of chemical contamination, keep employees safe, and increase productivity through more efficient circulation.

Sealed quality

Tight seals on high performance doors minimize air exchange between cleanroom areas and other areas and prevent entry of contaminants to help maintain cleanliness and ensure high quality production.

Differential pressure control

High-performance doors help maintain proper pressurization in cleanrooms to prevent cross-contamination between environments and prevent contaminants from entering production areas. Some models can withstand the pharmaceutical industry standard 0.10" W.C. of room pressurization.

Durable construction

Designed for high-traffic, high-traffic environments and engineered for everyday use, high-performance doors keep operations running smoothly without costly ongoing maintenance.

Control air pollution

High performance doors offer fast opening and closing speeds to minimize air intrusion and entry of contaminants.

Designed for simplicity

Whether you need to meet compliance regulations or minimize maintenance requirements, high-performance doors deliver the simple performance, reliability and ease of cleaning that cleanroom environments demand.